| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Power Source/Network | Section: Battery/Charging | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000033Q5003X |
| Title: POWER OUTLETS (INT): VOLTAGE INVERTER: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY
2. REMOVE LUGGAGE COMPARTMENT TRIM BOX
3. REMOVE ROPE HOOK ASSEMBLY
4. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY
5. REMOVE DECK BOARD REINFORCEMENT SUB-ASSEMBLY
6. REMOVE DECK BOARD BRACKET
7. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly LH
.
8. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the rear No. 2 seat assembly LH
.
9. REMOVE REAR SEAT CUSHION HINGE LOWER COVER LH
10. REMOVE REAR FLOOR STEP NO. 1 COVER
11. REMOVE REAR FLOOR STEP NO. 2 COVER
12. REMOVE REAR DOOR SCUFF PLATE LH
13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
14. REMOVE ROPE HOOK ASSEMBLY
15. REMOVE REAR FLOOR MAT SUPPORT PLATE
16. REMOVE QUARTER TRIM PANEL ASSEMBLY LH
17. REMOVE QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat)
18. REMOVE VOLTAGE INVERTER
(a) Disconnect the connector.
|
(b) Remove the 3 bolts and remove the voltage inverter. |
|
|